PRODUCT RANGE

Type: Weld-neck, Slip-on, Socket-weld, Lap-joint, Threaded, Reducing, Orifice & Spectacle Blind
Specification: ASTM, ASME, DIN, JIS, BS & IS
Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex, Super Duplex, Nickel Base Alloy Like Hast Alloy, Inconel, Etc...
Range: SIZE 1/2" TO 12" & FROM CLASS 150 TO 1500

Type:Olet, Weldolet, Sockolet, Coupling, Union, Bushing, Elbow, Tee, Insert, Swage Nipple, Nipple, Plug, Cap & Cross
Specification: ASTM, ASME, DIN, JIS, BS & IS
Material:Carbon Steel, Stainless Steel, Alloy Steel, Duplex, Super Duplex, Nickel Base Alloy Like Hast Alloy, Inconel. Etc….
Range:SIZE 1/2" TO 4" & FROM CLASS 3000 TO 9000

Type: Elbow, Tee, Reducer, Cap, Stub Bend, Barrel Nipple & Cross Specification: ASTM, ASME, DIN, JIS, BS & IS
Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex, Super Duplex, Nickel Base Alloy Like Hast Alloy, Inconel. Etc….
Range: 1/2"NPS TO 12"NPS & FROM SCH 5 TO Sch 160/xx

We supply make of SAIL / ESSAR / JINDAL / TATA / BHUSHAN/ INDIAN / IMPORTED etc material.

Specification: ASTM A240 / ASME SA240
Size:1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Thickness: 0.3mm to 120mm
Grade:304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202, A36 Etc.
Sheet Finishing: 2B, 2D, HR, CR, BA (No. 8), Satin (Met with PVC Coated)
Sheet & Plate in Form of: Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Etc.

Size: 2"-36"(50NB-900NB)
Class: 150-2500
Speciality: Metal to Metal Seat
Design: ASME 816.34 / BS 5351 / API SD /BS17292
Face to Face: ASME B16.10 /API 6D
End to End: BW / Flanged
BW End: ASME B16.25
Test: API 598 / BS 6755 / 12266
Fire Safe: Design Fire Safe API 607 / 6FA
Special: NACE MR-01-75 / 0103 Single / Two / Three Pieces CS SS Alloy DSS MOS Trunnion / Floating Ball, Full & Reduced Bore Anti-Static Device, Blow-out Proof Stem, Fire Safe Design Low Emission, Actuation Hand Lever, Gear Box, Pneumatic / Electrical Actuator / Hydraulic

Size: 1/2"-36" (15NB - 900NB)
Class: 150-2500 C S / CI SS /Alloys / Monel / Hastelloy’s Fabricated MOC
Design: ASME B16.34 / API 600 5352 API 600 / 603 / 602 / IS 14846
Face to Face: ASME B16.10 / DIN
End to End: SW/BW Type / Flanged End / RTJ
BW End: ASME B16.25
Test: API 598
Special: NACE MR-01-75
End Flange: ASME B16.5 / B16.47/DIN / BS / IS / JIS Solid / Flexible Wedge / Parallel / Double Disc Stem Protector, Linkage, Chain Pulley and Bypass arrangement on request
Specially: Bellow Sealed, Cryogenic and High Temp, Metal to Metal and Metal to soft seat Manual Operated / Gear Box / Pneumatic, Electrical Actuator

BOLTED BONNET & PRESSURE SEAL BONNET

Size: 1/2"-20" (15NB - 500NB)
Class: 150-2500 C S / CI SS / Alloys / Monel / Hastelloy’s Steel MOC
Design: ASME B16.34 / BS 1873
Face to Face: ASME B16.10 / DIN IS
End to End: BW Type / Flanged End / RTJ
BW End: ASME B16.25
Test: API 598 / BS 6755
Special: NACE MR-01-75 / 0103 Parabolic, Regulating, Throttle and Guide Type Plug Straight "T" Type, "Y" Type, Angle Type.
Specially: Below Sealed, Cryogenic and High Temp and Bypass arrangement. Metal to Metal and Metal to soft seat Manual Operated / Gear Box / Pneumatic / Electrical Actuator

BOLTED BONNET & PRESSURE SEAL BONNET

Size: 1/2"-36" (15NB - 900NB)
Class: 150-2500 C S / CI / SS / Alloys / Monel / Hastelloy’s MOC
Design: ASME B16.34 / BS 1868
Face to Face: ASME B16.10 / DIN IS / BS
End to End: BW Type / Flanged End / RTJ
End Flange: ASME B16.25
Test: API 598 / BS 6755
Special: NACE MR-01-75 / 0103 Self-Operated / Dash Pot / Counter Weight Non-Slam arrangement on request Wafer Type / Ball Type / Piston Type / Spring Loaded Metal to Metal and Metal to soft seat, Rubber Lining on request

BOLTED COVER & PRESSURE SEAL COVER

Size: 3/8"-10" (10mm - 250mm)
Class: 150-2500 CS / CI / SS / Alloys / Monel / Hast Alloys / MOC
Design: ASME B16.34 / API 526 / 520
Face to End: API 526
End to End: SW / SCR Type / Flanged End
End Flange: ASME B16.5 / DIN / BS / IS / JIS
SW End: ASME B16.11
Test: API 527 Set Pressure Test: As per Client Specification
Special: As NACE MR-01-75 Open / Closed / Lever, Spring / Dead Weight, Semi Nozzle / Full Nozzle
Speciality: Bellow Sealed, Cryogenic and High Temp. Metal to Metal and Metal to Soft Seat

Size: 25MM to 400MM
Design Code: BS / DIN / IS
Pressure Rating: 150 # 300 #
End Flange: ASME B16.5 / DIN / BS / IS
Mat of Con: CS / SS / ALLOYS / CI

We supply high quality Fencing Products. The product range offered by us consists of Wire Mesh, Strainer Wire Mesh and Fine Wire Mesh. Owing to their resistance to corrosion, accurate dimension and high tensile strength, these wires meshes are highly demanded.

• T-304 is standard stainless Fine, Medium, Coarse
• T-316 is premium stainless Fine, Medium, Coarse
• Stainless Welded Mesh
• Stainless Hex Mesh
• Micronics Mesh
• Use bolting cloth for sifting
• Stainless Steel Filter Discs
• Perforated Sheet
• Very widely used, most popular type of metal mesh
• Used from outer space to underwater and everywhere in between

NUTS

• Stainless Steel Standards: Astm / Asme A/Sa 193 / 194
• Stainless Steel Grade: B 8 (304), B 8C (Ss 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
• Duplex Steel: UNS No.S 31803, S 32205.
• Nickel Alloy Standards: Astm / Asme Sb 160 / 164 / 425 / 166 / 446 / 574 / 472
• Nickel Alloy Grade: UNS 2200 (Nickel 200) / UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8825 (Inconel 825), UNS 6600 (Inconel 600) / UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C 276), UNS 8020 (Alloy 20 / 20 Cb 3)
• Alloy Steel Standards: Astm / Asme A/Sa 193 / 194 Gr.
• Alloy Steel Grades: B 6, B 7/ B 7M, B 16, 2, 2Hm, 2H, Gr 6, B 7, B 7M.

BOLTS

• Stainless Steel Standards: Astm / Asme A/Sa 193 / 194
• Stainless Steel Grade: B 8 (304), B 8C (Ss 347), B 8M (Ss 316), B 8 T (Ss 321), A 2, A 4
• Duplex Steel Standards: UNS No.S 31803, S 32205.
• Nickel Alloy Standards: Astm / Asme Sb 160 / 164 / 425 / 166 / 446 / 574 / 472
• Nickel Alloy Grades: Uns 2200 (Nickel 200) / Uns 2201 (Nickel 201), Uns 4400 (Monel 400), Uns 8825 (Inconel 825), Uns 6600 (Inconel 600) / Uns 6601 (Inconel 601), Uns 6625 (Inconel 625), Uns 10276 (Hastelloy C 276), Uns 8020 (Alloy 20 / 20 Cb 3)
• Alloy Steel Standards: Astm / Asme A/Sa 193 / 194 Gr.
• Alloy Steel Grades: B 6, B 7/ B 7M, B 16, 2, 2Hm, 2H, Gr 6, B 7, B 7M.

SCREWS

• Stainless Steel Standards: ASTM/ ASME A/Sa 193 / 194
• Stainless Steel Grade: B 8 (304), B 8C (Ss 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
• Duplex Steel: UNS No.S 31803, S 32205.
• Nickel Alloy Standards: ASTM/ ASME Sb 160 / 164 / 425 / 166 / 446 / 574 / 472
• Nickel Alloy Grade: UNS 2200 (Nickel 200) / UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8825 (Inconel 825), UNS 6600 (Inconel 600) / UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), hast C set screws, UNS 10276 (Hastelloy C 276), UNS 8020 (Alloy 20 / 20 Cb 3)
• Alloy Steel Standards: ASTM/ ASME A/Sa 193 / 194 Gr.
• Alloy Steel Grades: B 6, B 7/ B 7M, B 16, 2, 2Hm, 2H, Gr 6, B 7, B 7M.

• TIG/MIG/SAW 120 : Cr-Ni austenitic filler rod with controlled ferrite content for TIG welding
• TIG/MIG 120 H : Fully austenitic stainless steel filler rod
• TIG/MIG/SAW 120 S : Austenitic, columbium-stabilized, stainless steel filler rod
• TIG/MIG 120 Si : Fully austenitic stainless steel filler rod
• TIG/MIG 120 S Si : Austenitic, columbium-stabilized, stainless steel filler rod
• TIG/MIG/SAW 121 : Austenitic Cr-Ni-Mo stainless steel filler rod for TIG / MIG welding
• TIG 121 LF SPL : Fully austenitic Cr-Ni-Mo alloyed stainless steel filler rod for TIG / MIG welding of AISI 316 L and 316 grades of stainless steels
• TIG/MIG/SAW 122 : Fully austenitic chromium-nickel steel filler rod for TIG welding
• TIG/MIG/SAW 123 : Austenitic stainless steel filler rod
• TIG/MIG 123 LMo : Austenitic stainless steel solid wire for welding of dissimilar metals
• TIG/MIG 124 : Fully austenitic stainless steel filler rod
• TIG/MIG 125 : Solid duplex stainless wire for welding 2205 type duplex stainless steels
• TIG/MIG 126 : Austenitic Cr-Ni-Mo stainless steel filler rod for TIG/MIG welding
• TIG/MIG 127 : TIG welding of 13% Cr stainless steels
• TIG/MIG 128 : Ferritic chromium steel filler rod for TIG/MIG/SAW welding
• TIG/MIG/SAW 129 :Filler rod for MIG, TIG, plasma-arc and submerged-arc welding
• TIG/MIG 130 : Austenitic-ferritic Cr-Ni-Mn steel filler rod for TIG 131 Austenitic-ferritic Cr-Ni-Mn steel filler rod for TIG/MIG welding
• TIG/MIG 132 : Chromium alloy with ferritic microstructure
• TIG/MIG 133 : Austenitic stainless steel wires with manganese for MIG welding
• TIG/MIG 135 : Flux cored wire for welding of AISI 409 ferrite stainless steels